Hi
This may be a basic question but can someone please tell me how I'm supposed to connect a cable to these?
https://drive.google.com/file/d/1-gBO3NJchpvuioV3K3e5tbe1NpjEj2c1/view?usp=sharing
I assumed the end part would crimp onto the insulation and the core would then be soldered onto the inner part, but I can't get the solder to stick to the connector. I'm sure they were described as solder connectors. Could it be a temperature problem? I think I'm getting it hot enough but I haven't soldered cables before. What size soldering iron bit should I be using for something like this?
Thanks
You need to provide acccess, so anyone with the link can view.
jon
Joined October 04, 2020 2Sunday at 10:28 PM
I managed to get this done. I was holding the connector in a metal clamp which was acting as a heatsink. I saw a tip saying to drill a hole in a piece of wood to hold the connectors and that worked perfectly. Hope this helps any beginners like me.