The code in " Flex sensor interfacing with AVR microcontroller" article is not working in atmel studio when I copy paste and run the code.Can we use the code in the "Flex sensor interfacing with AVR microcontroller" article for the atmega 32 and if we can use it, how should we edit the code for atmega 32?
As debasish said, find out the required library. Best way is to know the registers that are used in the project and configuring them in the Atmega32 individually, then turning the whole logic for atmega32.
Arduino: 1.8.8 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), 2, v2 Lower Memory, Disabled, None, Only Sketch, 115200"
soilcode:2:21: error: OneWire.h: No such file or directory
#include
^
compilation terminated.
exit status 1
OneWire.h: No such file or directory
This is the error in code please solve the error asap.
Debashis Das
Joined December 02, 2019 117Monday at 10:02 PM
Ther is a lot of things you need to do before it can be ported for atmega32. the problem is in this (1<<ADFR) Specific instruction, it tells the ADC to run in Free Running Mode. if you want to port this to atmega32 you have to remove this instruction and put somthing that is supported by atmega32