The ELB-REV4 seems to be a new embedded computer developmed specially for SCADA applications by a company called SSLA from germany. The development board seems tobe relatively new and hence cannot find many supporting detials in web. However a qucik google shows that this board is very similar to Raspberry Pi (both uses Linux) so with the minimum tech data provided by the compnay it should be possible to get things running on this board.
This is currently the only source of tech specs as much as I could see. Regarding the LCD connection its pretty obvious that the board will support all types of LCD displays. Which one are speaking about? The module itself has a connector for LCD shown in the datasheet linked above, but I was not able to find more detials. Also the module lacks a HDMI port so I wonder if touch screen and other normal TFT LCDs will be supported.
Bradyen
Joined August 14, 2018 44Tuesday at 03:25 PM
The ELB-REV4 seems to be a new embedded computer developmed specially for SCADA applications by a company called SSLA from germany. The development board seems tobe relatively new and hence cannot find many supporting detials in web. However a qucik google shows that this board is very similar to Raspberry Pi (both uses Linux) so with the minimum tech data provided by the compnay it should be possible to get things running on this board.
You can find the datasheet of the ELB-REV4 here: https://drive.google.com/file/d/10qSPFXBbwZ-paaHQ_vcbUqxVa9Zk5Nea/view
This is currently the only source of tech specs as much as I could see. Regarding the LCD connection its pretty obvious that the board will support all types of LCD displays. Which one are speaking about? The module itself has a connector for LCD shown in the datasheet linked above, but I was not able to find more detials. Also the module lacks a HDMI port so I wonder if touch screen and other normal TFT LCDs will be supported.